This is my first upload, its a mod to Box5's gooseneck, I used his n/b and Pedro's meshwheels, neck is shortened, and the submesh is supposed to be impossible to pierce. the other meshes are all made by me.
Thanks to:
Box5 for original file
Pedro for meshwheels
Squishy and Lilgti for support
All others who have put up with my questions for so long
A generic european style foodstuff tanker trailer.
Be careful when driving, it behaves like a partly filled trailer and tips over easiely!
It can be modified if the modified file is really independent, if you want to make a skin only you should use .skin files or release the texture file only.
If you need help with making an independent mod please contact me.
Give credits when modifying or using parts of this trailer!
Well, here it finally is.
After 7 months of work, one major rebuild and 3 N/B strutures, it's ready.
Features:
-Fully meshed Interior and Exterior
-Custom Dashbaord
-Custom Sounds
-Accurate Engine/Gearbox Data
-Opening Doors
-Opening Roof Hatches and Engine Bay
-Changeable destination board, with 7 destinations to choose from
-Realistic Handling - Use of a steering wheel is recomended
-Glow
-Ten Skins, plus a white one
If you'd like to make a comment or suggestion, or found a bug, please visit this thread. The Operations Manual, that contains detailed information on the bus and it's features, can also be dowloaded from there:
[forum link]
New map that I made with lots of rock crawling trails. A few custom built roads for hauling. A baja race with checkpoints (timer not working), and various desert things. Make shift landing area for planes (just so they weren't left out completely).
This is just a all around useful map for anything really... Enjoy.
This is my first car so i try to use as many features as i can, to reach basic level in ror modding. The result satisfy me and because many people LOVE ''Landys'' i decide to upload it. This discovery is a bit unique because of a major missmatch (have axles instead of independent suspension) but this make it a good offroad.
All files made by me except of vehicles main mesh that is created by Rogue (sketchup 3d warehouse) who gives me permission to release. Wiki was a good friend also.
The zip containe 2 truck files one stock and the modified which is avalaible in 2 colours
features:
F3/F4: air suspension
F1/F2: rear wheels steering
(one press function)
W: for axles locking cycle (OPEN=all open -> OPEN=only rear locked -> LOCKED = all locked)
ctrl+1: roof rack lights
ctrl+2: bumper fog lights
buncing cb antenna
This is my Huge Enclosed trailer. It can fit the liebber, that should tell how big it is. It's also only 34 nodes, so Fps are great with it. You have to really try to roll it over, so it has a great center of gravity. Has working flares, ties, feet, and ramp, so u can drive pretty much any vehicle in and strap it down.
Included in this pack are: 1)Gooseneck Enclosed Trailer 2)Bumper Pull Enclosed Trailer
Map by Donoteat.
Objects by Donoteat.
Oops Insurance building by kitteh.
Features:
Large city.
Skyscrapers.
Heliports.
Bus stops.
Fire department.
Police Station.
Hospital.
Elevated Highway.
Nonworking (for now) traffic lights.
Two and a half tons of distilled awesome for your enjoyment.
ENABLE OBJECT LOD BEFORE USING OR YOUR FPS WILL BE IN THE SINGLE DIGITS.
READ THIS POST TO FIND OUT HOW: [forum link] THIS MAP REQUIRES THE LATEST ROR UPDATE.
notice: the latest update from the update service already includes this map!
Hi,
I have added traffic lights (made by Lenni ([forum link] to North St Helens 3 (made by dajoun tunisia). They are for driving on the right side of the road.
To make the lights work, put the .mesh files and the .odef files in your C:Program FilesRigs of Rods 0.36.1resourcesmeshes.zip
Put the .material files in C:Program FilesRigs of Rods 0.36.1resourcesmaterials.zip
And put the .png files in C:Program FilesRigs of Rods 0.36.1resourcestextures.zip
Put nhelens3.zip in your packs
ALL CREDITS GO TO LENNI AND DAJOUN TUNISIA!
If possible, V2 will include stop signs!
Thanks For Downloading!
RORLVR1
features:
-powerful engine (in truck file)
-soft tires
-special sound(cummins: BY:metrodude)
-plus lights ctrl+1
-You do not need to download the original.
ANY MOD thats ment to be public one day needs my written PERMISSION
Pack contains 3 Helicopters:
- SAR Version (flexbody patch needed) - Logging Version (flexbody patch needed) - Aviation Version ( feature reduced and high FPS for small comps and multiplayer )
Credits go to Box5Diesel and adeodat for various contributions, please check the ingame T-Screen
How to lift off, fly and pick up a load...READ THIS FIRST
- you can always see a help-chart by pressing and holding F4 in pilots view ( SAR and Logger only ) - you can get a better overview by pressing F3 once in pilots view, released by pressing F4 once ( SAR and Logger only )
Enter the helicopter
Press the Parking Break ctrl (strg) Pos1: Fire up all engines simultaneously ctrl (strg) Page up: Maximum Power to all engines Page down once, you overpower it and please reduce it by 1 click, only use the BOOST for extrem Load lifting, it will stress the rotorheads to the absolute maximum they can withstand. If the AOA-Inidicators is permanently OVER 15 ( the red marker ), you need a parachute :D
..wait until engines reach green area... 96 RPM (%)
gently apply F1 until the Helicopteri lifts off
Arrowkey UP: Accelerate/forward flight: Nose down ..watch your height and apply more lift if needed (F1) Arrowkey Down: Breaking/reverse flight: Nose up, reduce lift for some time not to gain too much height (F2)
Z/X (Y/X) :Turning, will do a pivot in hover mode that needs minor corrections not to drift / accelerate...just watch the virtual horizon Will bank and turn in forward flight faster then 30 knots, additional nose down + banking = higher turn ratio..
Arrowkeys Left/Right: Strafing while hovering, Bankingl left/right in forward flight
HOW TO:
1. Picking up a load
Land close to a load with ONE ropable, best placed in top center Press O to shoot out the tie Wait for the tie to move the hook sideways Apply rope to let the tie pull the node to the ropable at the load (F5) When tie stops working, lock the hooknode (L) and then release the tie (O) Apply more rope to get some manouver space for the heli
-> Start, center the heli over the load, climb slowly, correct against the weight of the load and lift it off (F1) - Pull the load close to the heli with F6 to fly and gain control
Releasing it is easy: L to drop it, F6 and then L to place it
You can lift and fly 13 tons, dont go too fast or the rotorhead will deform permanently and you need a parachute instantly :D
2. Rollon Loads: (SAR and Logger only)
Drive in a car with 5 (!) ropables, one on each edge and one in the center. Park in the middle of the Helicopter, activate Parkingbrake, switch of the engine, leave the car Enter the helicopter, Press "O" to tie the car down. It needs to be really centered in the helicopter, weight balancing is vital for flight characteristics.
this height adjustable car trailer, is designed and built for easy loading of low ground clearance vehicles and loads.
the bed is 2m (6'56) wide and 5m (16'40) long.
load capacities unknown.
it has 4 ties 2 at the front and 2 near the wheels, press o to lock the load.
it has an invisible foot near the front to make attaching to a vehicle easier ctrl+f3/f4.
the bed lift hydrolics are run via ctrl+f1/f2.
the mesh's and textures that are produced by me are distributed open for use to all with credit to author.
Project TATRA 815 CKD AD-28 is finally COMPLETE.
You can download it and have fun with this crane.
COMMAND for use:
F1 - F2 : rotation crane tower
F3 - F4 : lift arm
F5 - F6 : disengagement arm
F7 - F8 : spooling hook
ctrl + F1 - ctrl + F4 : disengagement/clutch shelf
ctrl + F5 - ctrl + F12 : dusebgagement/clutch shelf (up/down)
Before you start drive you must locked hook nose oof cabin, because it will cradle. For locked use button "L" and locked arm button "O".
