This is my modification to Pricorde's Wahoo boat. I added a (quite wiggly) fire hose to the front, two lightbars and beacon, and a new skin, that is red and white.
Made for 0.36.1, so just place in your packs folder in My Documents/Rigs of Rods
Here is the most recent C1 catamaran boat, also included in the pack is the boat loader off-road transport and boat transport trailer.
the boat has working rudder controlled with F7/F8, adjustable trim tabs F9/F10 and prop depth F11/F12
this boat is also a .load so that you can spawn it at a load bay to load onto a trailer or truck to take it to the water
the off-road boat loader is based off the Oshkosh LVRS by cadillac84 with the addition of a tow hook F5,6,7,8 to adjust position, and the boat loader, F3/F4
the boat transport trailer is based off the default semi.trailer and has the boat loader operated by F3/F4.
instructions for boat loading onto the trailer
- Back the semi onto the trailer and hitch it up like you would any normal trailer
- Press F4 to move the boat hitch back (press once)
- Once this is all the way back, get out of the truck and into the boat.
- Drive the boat up to the back of the trailer hitch so the prongs of the boat are close to the hitch – when close, press ‘o’ and watch the ropes attach and then wait for them to shorten.
- While still in the boat press F3 (commands are forwarded to the trailer) and the boat will be dragged up onto the trailer.
- Once its all the way up, get out of the boat and into the truck, press ‘o’ to lock the boat onto the trailer.
- Then drive away.
Instructions for loading onto the off-road loader
- Press F4 to move the boat hitch back (press once)
- Once this is all the way back, get out of the truck and into the boat.
- Drive the boat up to the back of the trailer hitch so the prongs of the boat are close to the hitch – when close, press ‘o’ and watch the ropes attach and then wait for them to shorten.
- get out of the boat and into the truck - F3 and the boat will be dragged up onto the loader.
- Once its all the way up press ‘o’ to lock the boat onto the loader.
- Then drive away.
for both of them, execute the procedure in reverse order to unload, this can be done on the dry dock or into the water (load and unload)
This file was requested, it's not really of 'release' quality but since you asked for it... :P
Changes include:
40x the engine power
1.5x longer boat
Few support nodes and beams to keep it (mostly) together.
+ minor mods for structural stability.
